Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

11.06.2025 05:31

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

the problem then depends on "how fast does the fuse operate?".

At one ohm, the resistor has a maximum of 1 watt power.

For this case there are devices called Metal oxide varistors (MOV).

Why don't I want to talk to my girlfriend when she loves me a lot? I feel bored.

But it can get overloaded, and no longer works.

but this device (an Inductor) … impedes the rapid changes in the current.

One is “what exactly is in a ‘surge protector’ ? ”

How do you get a teenage boy to care about hygiene?

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

In schematic diagrams this is the symbol for a fuse:

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Can you describe your experience taking the AIPMT/NEET entrance exam? Did you feel nervous or afraid while entering the examination hall and writing the exam?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

There are two important concepts here.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Predator: Killer of Killers Ending Explained - Does It Set Up Prey 2? - IGN

Edit 2024–10.

The third is lightning and “how it gets conducted into a home.”

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

NBA Finals’ 17 best players ranked for Thunder vs. Pacers series - SBNation.com

There are three different concepts here that are getting confused.

Upvotes:

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Meta buys a nuclear power plant (more or less) - TechCrunch

2024–10–16 [ OO OLAOYE OYEBODE ]

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Measles vaccinations drop as CDC updates travel guidance - Yahoo

But… the neutral is now “floating” because of the 1 ohm resistance.

This one hit behind the barn.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Vikingo closes historic Worlds Collide with impressive win over Chad Gable - Cageside Seats

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

At least they know the answer if they wanted it.

what exactly is a ‘surge’ protector?

What is the most comfortable heel height for women's dress shoes and what are the differences between wearing high heels and lower heels?

Can the fuse protect the electronic devices from lightning instead of a surge protector.

eight

This is 'the assistant's answer'

The Fastest Speed That Humans Have Traveled Is 39,937.7 Kilometers Per Hour - IFLScience

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

What is lightning?

Are vampires real?

Now when you have a certain ac resistance, then a current flows in a loop.

It seems Mohan does not understand the difference between a comment and an Answer.

nine

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What does a fuse do?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

a photo is worth a thousand words.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

[image of Common-mode choke]

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

I post the exact comment here.

So, the voltage could go up to 500 volts, and the fuse will not open up.

The bolt then partially travels down the line to your home.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

First Sentence:

He then describes Rainy Season and Lightning.

Barnstars:

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

It also is a device that limits the change in current flow.

so, what happens?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

He then asserts :

He then describes the function of a fuse.

The other is “what does a “fuse” do?”

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Because the load is inductive, the current lags the voltage.(by a bit).

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

A fuse is a non-resetable over current circuit protector.

Here is a simplified AC power diagram.

An AC voltage/ current source, and an ac inductive load.

(Dc diagram shown, AC is similar).

This device then solves the entire problem.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

This is where this question deviates from being a 'generic' question, and becomes more specific.

These devices are installed between the “hot” and “neutral” and protective ground.

One

These are simplified answers to the original question, and does not change anything I wrote above.

2024–10–14 [Omar Gharbi Omar Gharbi ]

A circuit breaker is similar, but is resettable.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

but I think this circuit , shows a few more pieces.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

2024–10–10[John johnson John Johnson ]

[old diagram got deleted by accident]

This is where the MOV conducts again, and dissipated the energy.

The MOV will conduct when the voltage exceeds 50% of line voltage.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].